DriTac presents Eco-DriBloc Premium “Green” Moisture Control and Adhesive Isolation Membrane for resilient flooring installations. A fast drying, single-component concrete moisture control system and adhesive isolation membrane, Eco-DriBloc allows installers to apply a moisture mitigation system and install their resilient floor on the same day with only a three-hour dry time, the company said.

This roller-applied, two-in-one product offers a zero-VOC, zero-solvent and low-odor formula that also serves to isolate old adhesive residue including cutback, according to DriTac. Manufactured in the USA, Eco-DriBloc is warranted for up to 15 lbs. of concrete moisture vapor transmission per the ASTM F1869 Calcium Chloride Test Method, and up to 90% RH per the ASTM 2170 Relative Humidity Test. Eco-DriBloc is for use with DriTac resilient water-based flooring adhesives and available in one and four-gallon pails.

Eco-DriBloc can be used under most types of resilient floor coverings, including luxury vinyl tile/plank, fiberglass back sheet vinyl, carpet tile, VCT, cork tile, cork/rubber/foam underlayments, as well as laminate flooring and floating floors. This product is designed to be used over porous concrete to help reduce penetration of the adhesive and dusting of the concrete, resulting in increased spread rates and a stronger bond with DriTac resilient water-based floor covering adhesives, the company noted.

For more information, visit www.dritac.com.