Laticrete’s new Strata_Mat XT is a next-generation, high-performance uncoupling membrane designed specifically for ceramic tile and dimension stone installations, according to the company.
Strata_Mat XT provides vapor management, eliminates transmission of in-plane substrate cracks of up to 1/8” (3 mm), assists with easier floor layout (as chalk lines are easily visible on the surface prior to tile installation) and provides the requisite support and load distribution for tile and stone covering.
At 5/16” (7.9 mm) thick, Strata_Mat XT helps to creates an even transition between typical 1/4” to 3/8” (3 to 9 mm) thick tile and 3/4” (19 mm) thick hardwood flooring. According to the company, this new product also allows installers to see mortar coverage underneath the mat during installation without having to lift and verify.
Strata_Mat XT features Mortar Hydration Vents, which create a mechanical bond between the mat and adhesive mortar and allow the mortar to cure faster. This provides a stronger bond of tile and permits faster time to grout when using both modified or unmodified mortars—enabling the use of the appropriate mortar for an installation.
Part of Laticrete’s Lifetime System Warranty, Strata_Mat XT may be used on almost any substrate including: concrete, mortar beds, oriented strand board, exterior glue plywood, cement backer board, cement terrazzo, resilient flooring, existing tile or stone, gypsum underlayment and light weight concrete, according to the company.
For more information, visit laticrete.com.